hsl-terminator high speed link extension module 7-10 www.adlinktech.com 1 12 2 3 4 5 6 real-time distributed i/o 7 8 9 10 11 13 high speed link extension modules HSL-HUB3 / hsl-repeater features linking style: master to hub, hub to hub, hub to slave support t bracing connection and star connection (subsystem concept) one input port with 3 output segment ports jumper selectable transmission speeds: 3/6/12 mbps full and half duplex transmission mode are jumper selectable rj-45 phone jack for easy installation 24 v dc input the HSL-HUB3 is an hsl subsystem which can offer one to three port transformation in automation applications. unlike the traditional daisy chain configurations, the HSL-HUB3 provides more flexible connections (tree configurations) while building up the application. the hsl-repeater is the hsl subsystem which can extend the connection distance in automation application, especially in factory automations. one hsl bus can connect up to seven repeater modules and wire lengths up to 2.4 km at a 3 mbps transmission rate. in other words, all 2016 points can be monitored within 4 ms via the hsl bus up to 2.4 km in length to provide fast, time-deterministic, and robust configurations over traditional rs-485 devices. general introduction 12 mbps 100 m 200 m 300 m 600 m 800 m 6 mbps 200 m 400 m 600 m 1200 m 1600 m 3 mbps 300 m 600 m 900 m 1800 m 2400 m 300 m 2400 m without hsl-repeater with hsl-repeater x8 without repeater repeater x 1 repeater x 2 repeater x 5 repeater x 7 the extension possibility of hsl system by using HSL-HUB3/hsl-repeater HSL-HUB3 hsl-repeater features linking style: master to hub, hub to hub, hub to slave support t bracing connection and star connection (subsystem concept) one input port with 3 output segment ports jumper selectable transmission speeds: 3/6/12 mbps full and half duplex transmission mode are jumper selectable rj-45 phone jack for easy installation 24 v dc input the hsl-terminator can be used for stable communication. the hsl - terminator provides an adjustable resistor to allow the impedance of the wiring of the hsl system or motionnet system to be adjusted to ensure the quality of the transmission. general introduction hsl slave modules software & utilities fanless embedded computers daq pxi modular instruments gpib & bus expansion motion control pac remote i/o communi- cations vision cpci & industrial computers
|
